Home Login Contact Us Cart Logout
CAS200 16-Channel Alarm Scanner
Multi-Loop Alarm Monitoring and Data Acquisition
The Watlow Anafaze CAS200 Compact Alarm Scanner provides 16 channels of alarm monitoring and data acquistion for a broad range of applications and processes. Its compact 1/8 DIN size, advanced features and superior performance make it idea for industrial and laboratory applications that require reliable alarm monitoring and data analysis. The CAS200 comes standard with WATVIEW-CAS, Windows software that provides on-line setup, alarm notification, recipe management, trend graphing and spreadsheet importable report data. The CAS200 supports the Modbus RTU protocol making it compatible with virtually all automation and data acquisition software.

The Watlow CAS200 Scanner adds independent data acquisition and alarm monitoring to your process. It can measure up to 16 inputs. Connect any combination of thermocouples, linear dc voltage or dc current to the same device. Sensor data is transferred to a computer or programmable logic controller (PLC) through a standard RS-232 or RS-485 port.

The CAS200 has a menu-guided operation with full text display. It stores up to eight sets of alarm settings which are selected via keypad or digital inputs. It can show the process in the engineering units preferred by the operators. It can display one channel continuously or scan and display each channel.

The CAS200 has 34 user-configurable alarm outputs which can integrate with other process automation equipment. You can configure independent high and low process alarms and deviation band alarms.

The CAS200 is UL and C-UL listed and meets the European Community's EMC directive and bares the CE mark.

Download Watlow CAS200 Alarm Scanner Brochure (pdf 405K)

Download Watlow CAS200 Alarm Scanner User's Manual (pdf 1.2MB)
2 0 0 - __ __ __ __ __ __ __ __
1 2 3
4 5 6 7 8 9 10 11
To order, make a selection in each category below, then click the "submit" button at the bottom of the page.
The part number and price will be displayed on the next page.
1-3. Alarm Scanner Model
Price
200 = Series 200 - 16-Channel Alarm Scanner, 1/8 DIN
$1,745.00

4. Terminal Board (choose 0, 1 or 2)
0 = SCSI connector, customer supplies terminal board and cable
NC
1 = 18-pin terminal block mounted on unit, no SCSI cable required
$60.00
2 = 50-pin terminal board, includes 3-foot SCSI cable
$145.00

5. Power Supply (choose 0 or 2)
0 = No power supply
NC
3 = 90 to 265V~(ac) 50/60 Hz, +15V(dc) @ 1.2A
$145.00

6. SCSI Cables (for use with 50-pin terminal board) (choose 0, 1, 2 or 3)
0 = No special SCSI cable (3-foot cable included with 50-pin terminal board)
NC
1 = 6-foot SCSI cable
$60.00
2 = 3-foot right angle SCSI cable
$205.00
3 = 6-foot right angle SCSI cable
$225.00

7. Communications Cable (for EIA/TIA-232 communications with computer)
(choose 0, 1, 2 or 3)
0 = 4-foot communications cable (DB-9 female/bare wire)
NC
1 = 10-foot communications cable (DB-9 female/bare wire)
$50.00
2 = 25-foot communications cable (DB-9 female/bare wire)
$55.00
3 = 50-foot communications cable (DB-9 female/bare wire)
$80.00

8. Scanner Software (choose 1 or 3)
1 = Windows based software with parallel port key
NC
3 = Windows based software with USB key
NC
9. Serial Communications Jumper Settings (choose 0, 1 or 2)
0 = EIA/TIA-232
NC
1 = EIA/TIA-485
NC
2 = EIA/TIA-485 terminated
NC

10-11. Special Inputs (choose 00 or XX)
Standard unit is configured for thermocouples and -10 to 60mV linear inputs. For other sensors, order special inputs CASSI module below.
00 = Thermocouples and -10 to 60mV inputs only
NC
XX = Number of current & voltage inputs. (RTD not available on 200).
$40.00/loop

Select number of special inputs needed

If you do not need special inputs click on the "submit" button now. Your part number and price will be shown on the next page.

CASSI Special Inputs Module - if you need special inputs, complete the code number by making selections below and then click on the "submit" button below.
C A S S I __ __ __ __ __ __
1 2 3 4 5 6 7 8 9 10 11

1-5. CASSI Requirement (choose "not needed" or "required") - Price included above.
CASSI not needed (do not complete sections below)
NC
CASSI required (complete sections below)
NC

6-7. Special Input Type (choose one type)
Note: If more than one type of special input needed, please contact us for ordering.
43 = 0-10mA(dc)
NC
44 = 0-20mA(dc) / 4-20mA(dc)
NC
50 = 0-100mV(dc)
NC
52 = 0-500mV(dc)
NC
53 = 0-1V(dc)
NC
55 = 0-5V(dc)
NC
56 = 0-10V(dc)
NC
57 = 0-12V(dc)
NC

8-9. Start Channel Number

= Channel number ##
NC

10-11. End Channel Number

= Channel number ##
NC

This page last modified on 9/1/2009
Untitled Page
About WCPE/Contact Info | Terms & Conditions | Request Catalog | Business Hours M-F 8-5PST
For Packaging Equipment & Bag Sealers see our WCPSealers.com website!