Home Login Contact Us Cart Logout
Watlow Style AC Connector MI Thermocouple
Mineral Insulated - Dual Element - Plug or Jack Termination

The Watlow Style AC Mineral Insulated Thermocouple temperature sensor "connector" style come with a male plug or female jack connector directly attached to the sheath. Because it is constructed with XACTPAK mineral insulation, the thermocouple is protected from moisture, thermal shock, high temperatures and high pressure.

Dual Element style - allows you to run two instruments off the same element, reducing costs.

Achieving specified temperature levels is critical to industrial processes. It's imperative that temperature sensors are designed and manufactured to exacting specifications for accuracy and reliability. Watlow is committed to providing you with the most accurate, high-integrity temperature measurement products possible. Watlow offers the greatest breadth of contact temperature measurement sensors and related components. Whatever your temperature sensing needs, Watlow can provide the optimum configuration, with the accuracy you require.

Performance Capabilities:

  • Watlow MI thermocouples easily handle temperatures up to 1200°C (2200°F).
  • They meet or exceed initial calibration tolerances per ASTM E 230.
  • Diameters as small as 0.010 in (0.25mm)
  • Flexiblity of the XACTPAK material allows you to bend the thermocouple without risk of cracking

To order a Watlow Style AC Dual Element Thermocouple build the desired 15-digit model part number using the ordering information form below.

Download Watlow Style AC Thermocouple Catalog Page (pdf)

Custom Ordering Information -
Watlow Style AC Dual Element Thermocouples
A C ___ ___ ___ 0 ___ ___ ___ ___ ___ ___ 0 0 0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
To order, make a selection in each category below, enter the quantity needed,
then click the "submit" button at the bottom of the page.
The part number and price will be displayed on the next page.
NOTE: Prices shown are for orders of 5 pieces or more.
There is a higher price for low quantity orders which is shown on next page.
1-2 Construction Style
Price
AC = Mineral insulated plug or jack termination

3. Sheath Diameter (choose E, F, H or J)
Limited Availability - consult yellow chart below for availability with sheath material & calibration type.
E = 0.063 inch diamater $14.80
G = 0.125 inch diameter $16.00
H = 0.188 inch diameter $18.75
J = 0.250 inch diameter $21.40

4. Connector Type (choose A, B or C)
A = Standard plug $21.00
B = Standard jack $25.00
C = Standard plug with mating connector $36.00

5. Fittings (choose one)
0 = None NC
A = Fixed single thread 1/8 NPT 303SS - sheath sizes 0.063 to 0.250 $10.50
B = Fixed single thread 1/4 NPT 303SS - sheath sizes 0.125 to 0.250 $15.00
D = Fixed single thread 1/2 NPT 303SS - sheath sizes 0.125 to 0.250 $15.00
F = Fixed double thread 1/2 NPT 303SS - sheath sizes 0.125 to 0.250 $20.00
G = Adjustable compression TFE Gland 1/8 NPT 303SS - sheath sizes 0.063 to 0.188 $8.25
H = Adjustable spring loaded double threaded 1/2NPT 316SS - sheath size 0.250 $20.00
J = Non-adjustable compression 1/8 NPT brass - sheath sizes 0.125 to 0.250 $6.00
L = Non-adjustable compression 1/8 NPT 303SS - sheath sizes 0.063 to 0.250 $9.50
Q = Adjustable compression Lava Gland 1/8 NPT 303SS - sheath sizes 0.063 to 0.188 $12.00
V = Adjustable compression Lava Gland 1/4 NPT 303SS - sheath size 0.250 $40.00
W = Bayonet lockcap and spring - plated steel - sheath sizes 0.125 to 0.188 $9.50
X = Adjustable compression TFE Gland 1/4 NPT 303SS - sheath size 0.250 $39.00
2 = Flat weld pad - 304SS - all sheath sizes $20.00
5 = Milled slot weld pad - 304SS - all sheath sizes $23.00

6. Unused - Enter "0"
0 = Unused NC

7. Sheath Material (consult green chart below for pricing)
Limited Availability - consult yellow chart below for availability with sheath diameter & calibration type.
A = 304SS see below
F = 316SS see below
Q = Alloy 600 see below

8-9. Sheath Length "L" (in whole inches) - (select two digits 00 to 99)
Tens - Ones
see below

10. Sheath Length "L" (fractional inches) - (choose 0 or 4)
0 = 0 see below
4 = 1/2 see below

11. Junction Type (choose D, H or W)
D = Exposed Dual, Isolated $5.00
H = Grounded Dual, Common NC
W = Ungrounded Dual, Isolated $6.10

12. Calibration (choose E, J, K,T, 2, 3, 4 or 8)
Limited Availability - consult yellow chart below for availability with sheath diameter & sheath material.
E = Standard Limits Type E NC
J = Standard Limits Type J NC
K = Standard Limits Type K NC
T = Standard Limits Type T NC
2 = Special Limits Type E $5.00
3 = Special Limits Type J $5.00
4 = Special Limits Type K $5.00
8 = Special Limits Type T $5.00

13-14. Unused - Enter "00"
00 = Unused NC

15. Special Requirements
0 = None NC

ENTER QUANTITY (Higher price applies for quantities less than 5 pieces)


Options 3, 7 & 12
Calibration & Sheath Availability
Options 7-10
Sheath Length Pricing
(per inch)

0.063
(E)
0.125
(G)
0.188
(H)
0.250
(J)
0.063
(E)
0.125
(G)
0.188
(H)
0.250
(J)
304SS
(A)
--
--
J
3
J
3
J, K
3, 4
N/A $0.37 $0.48 $0.75
316SS
(F)
--
--
E, T
2, 8
K, T
4, 8
E, K, T
2, 4, 8
N/A $0.43 $0.55 $0.85
Alloy 600
(Q)
K
4
K
4
K
4
K
4
$0.33 $0.48 $0.97 $1.75
This page last modified on 7/29/2014
Untitled Page
About WCPE/Contact Info | Terms & Conditions | Request Catalog | Business Hours M-F 8-5PST
For Packaging Equipment & Bag Sealers see our WCPSealers.com website!