Watlow Ultramic Heaters Advanced Ceramic Heating Elements
			The new Watlow Ultramic 600 heaters are designed for thermal applications where the high performance of an advanced ceramic heater is required to ensure optimal effectiveness of the equipment and process. Ultramic 600 heaters are constructed of aluminum nitride (AIN) and incorporate a thermally matched proprietary heating element that provides maximum performance in challenging applications. AIN is especially suitable for applications requiring a clean, non-contaminating heat source. Additionally, the excellent geometric stability ensures consistent part-to-part thermal contact during heating cycles. Watlow Ultramic heaters can operate up to 600°C with an ultra-fast ramp rate of up to 150°C per second depending on the application, heater design and process parameters. In addition to excellent thermal characteristics, the Ultramic 600 has high electrical isolation and typically provides superior chemical resistance as compared to traditional metal heaters. FEATURES & BENEFITS: Robust AIN Ceramic - Provides durable heater construction and thermal transfer necessary for high temperature and long heater life. Process temperatures up to 600°C (1112°F). Rapid Prototyping - Custom prototypes can be delivered in weeks. Superior Electrical Performance - Low leakage current; high breakdown voltage. High Thermal Conductivity - Fast temperature ramp rate of up to 150°C (270°F) per second. Quick cool-down. Extremely uniform temperatures over the heater surface. Thermocouple - Integrated into the assembly (patent pending) UL Agency Compliance (pending) Download Watlow Ultramic Advanced Ceramic Heater brochure (pdf 2.5M)
	Watlow Ultramic Heater Ordering To order, select a heater from the stock list below , then click the "submit" button. The part number and price will be displayed on the next page. For custom sizes or configurations, please call us at (800) 3WATLOW.
	Watlow Ultramic Heater - Select the Heater you need. Standard configurations include: • Power lead wires with 305mm (12 in.) of Teflon insulation, rated to 205°C. • Bonded Type K thermocouple with 305mm (12 in.) Teflon insulated lead wires, rated to 205°C. • Surface finish (Ra) <1.5 µm (60 µ-in.) • Maximum temperature for stock heaters is 400°C. Code No. Dimensions mm (in.) Watt Density Watts Volts Lead Orientation Area mm (in.) Price SQUARE CER-1-01-00002 25mm x 25mm (0.98 in x 0.98 in) High 967 240 Note 1 625 mm² (0.96 in²) $800.00 CER-1-01-00006 50mm x 50mm (1.97 in x 1.97 in) Medium 1938 240 Note 1 2500 mm² (3.88 in²) $780.00 CER-1-01-00093 25mm x 25mm (0.98 in x 0.98 in) Low 150 120 Note 1 625 mm² (0.96 in²) $250.00 CER-1-01-00097 19mm x 19mm (0.75 in x 0.75 in) Low 200 120 Note 1 360 mm² (0.56 in²) $200.00 CER-1-01-00333 15mm x 15mm (0.59 in x 0.59 in) Medium 150 48 Note 1 225 mm² (0.35 in²) $350.00 CER-1-01-00334 12mm x 12mm (0.47 in x 0.47 in) High 200 48 Note 1 144 mm² (0.22 in²) $350.00 CER-1-01-00335 8mm x 8mm (0.31 in x 0.31 in) Low 21.5 12 Note 2 64 mm² (0.099 in²) $225.00 RECTANGULAR CER-1-01-00001 25mm x 15mm (0.98 in x 0.6 in) High 580 120 Note 1 375 mm² (0.59 in²) $490.00 CER-1-01-00003 50mm x 10mm (1.97 in x 0.39 in) Medium 582 120 Note 1 500 mm² (0.77 in²) $350.00 CER-1-01-00004 50mm x 10mm (1.97 in x 0.39 in) High 770 240 Note 1 500 mm² (0.77 in²) $490.00 CER-1-01-00005 50mm x 25mm (1.97 in x 0.98 in) Medium 1453 240 Note 1 1250 mm² (1.93 in²) $500.00 CER-1-01-00007 75mm x 25mm (2.95 in x 0.98 in) Medium 1455 240 Note 1 1875 mm² (2.89 in²) $780.00 CER-1-01-00098 25mm x 15mm (0.98 in x 0.6 in) Low 180 120 Note 1 375 mm² (0.59 in²) $200.00 CER-1-01-00105 50mm x 25mm (1.97 in x 0.98 in) Low 100 120 Note 1 1250 mm² (1.93 in²) $250.00 RING CER-1-02-00001 38mm OD x 29mm ID (1.50 in OD x 1.14 in ID) High 733 120 Note 2 473 mm² (0.74 in²) $490.00 CER-1-02-00002 77.5mm OD x 59mm ID (3.05 in OD x 2.32 in ID) Medium 770 240 Note 2 1982 mm² (3.08 in²) $780.00 CER-1-02-00074 25.4mm dia. solid disk (1.00 in dia. solid disk) Medium 300 120 Note 1 507 mm² (0.79 in²) $500.00 Note 1 - Leads exit from side/edge, heater thickness is 2.5mm (0.98 in.) Note 2 - Leads exit from top face, heater thickness is 3.0mm (0.12 in.) This page last modified on 1/10/2012 About WCPE/Contact Info | Terms & Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment & Bag Sealers see our WCPSealers.com website!